How to Find Which Replacement Vent Lid Replaces Cracked Vent Lid on 1987 Lynx Prowler Camper

Question

Question:

I have an older camper a 1987 Lynx Prowler 22. During the snowstorm this week my vent covers cracked and need to be replaced. Can you tell me which cover i need to buy? Thanks

asked by: Joe M

1

Helpful Expert Reply:

When measuring for a replacement vent lid, you will want the outside dimension of the housing that extends through the trailer roof. This dimension is typically 14 by 14 inches.

Closely examine the remaining portion of the vent, looking for a manufacturer name or model number. If you cannot find that information, you can examine the replacement lids we offer (see link) and match them up by the dimension of the housing and the style of hinge. Each replacement lid will have a detailed photo somewhere on the product page showing the style of the hinge.

Unfortunately, I don't have any reference that would tell me what vent your trailer originally used.

expert reply by: Mike L

1

click to enlarge

Answer 1

For an A-frame jack that meets that diameter criteria, I recommend the A-Frame Trailer Jack by Dutton-Lainson #DL22530 . This jack will have an inner tube diameter of 1- 3/4 inches and an outer diameter of 2 inches. It is constructed of heavy duty…

view full answer...

Answer 2

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

view full answer...

Answer 3

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

view full answer...

Answer 4

While the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 was designed to fit on trailer with a rain gutter, we have had several install it on their trailer without rain gutters. I have also included our review video below where you can see…

view full answer...

Answer 5

It sounds like you have a Heng's Roof Vent 122112. This is known as the Ventline Old Style Rounded Dome Trailer Roof Vent. Replacement parts are, #BV0554-01 for white or, #BV0554-03 for black. This will be the continuous hinge style. Please…

view full answer...

Answer 6

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

view full answer...

Answer 7

It looks like your Sundowner roof vent is a standard 14 x 14-inch size with a continuous-type hinge. For such a vent we offer the Ventline Vent Cover for Old Style Rounded Dome Trailer Roof Vents #BV0554-03 (smoke) and #BV0554-01 (white). We also…

view full answer...

Answer 8

The lowest profile roof vent we have that has a fan built into it was the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K which when closed sticks up 4-1/4 inches from the roof it's installed on. (edit: now the lowest profile is the part #MA00-04301M…

view full answer...

Answer 9

To determine the correct cover, you will need to measure the vent opening. The most common openings are 14 1/4" x 14 1/4", and have vents that are 14" x 14". After you make your measurements, you will need to determine what type…

view full answer...

Answer 10

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

How to Find Which Replacement Vent Lid Replaces Cracked Vent Lid on 1987 Lynx Prowler Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching