Replacement Spring Bar and Head Recommendation for 1,200 lb Draw Tite Weight Distribution
Question:
I have an older Draw-tite hitch head that has 06623-099 on the bottom left of the label and v5 on the bottom right. Is there a replacement head that I could purchase to use my existing spring bars? The bars are 1200#, and I have a dual cam sway system installed as well. I would rather not have to replace the whole system, and just the head if at all possible. I know this system is obsolete, but didnt know if a new head could accommodate the existing bars or not. Thanks.
asked by: Tim C
Expert Reply:
I wish we had replacement parts that would work, but the bars you have aren't compatible with the current bar designs made so it's going to come down to you replacing the head and the bars.
So for bars you would need the part # RP66009 which has the 1,200 lb capacity you need and then for a head you would want the part # RP58167.
Products Referenced in This Question
Replacement Head for Reese Weight Distribution System - Trunnion Bar
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Trunnion Bar
- Reese
more information >
Product Page this Question was Asked From
Replacement Trunnion Spring Bar for Reese Weight Distribution System - 1,200 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1200 lbs TW
- Trunnion Bar
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Draw-Tite 06623-099 Wt. Dist Hitch w/ Sway Control Chain Hangers
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Video: Curt Weight Distribution C17307 Review
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Shop: Reese Replacement Trunnion Spring Bar, 1,700 lbs
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Q&A: Recommended Weight Distribution System for a Jayco Eagle HT 284bhok
- Shop: Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW, 800 lbs TW
- Search Results: equalizer
- Search Results: draw~tite
- Search Results: 2.5 hitch shank
- Q&A: Can 1,700 Pound Trunnion Spring Bars Replace 800 Pound Spring Bars for Trailer Weight Distribution
- Q&A: Is it Possible to Use Too High Rated of a Weight Distribution System
- Q&A: Recommended Weight Distribution for Trailer With 1600 lbs of Tongue Weight
- Q&A: Will New 1,200 Pound Reese Spring Bars Fit a 5-Year-Old Reese Weight Distribution System
- Q&A: Are 1,700 lb Spring Bars Right for Camper Trailer With 1,400 lb Dry Tongue Weight
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: tongue weight scale
- Search Results: weigh safe
- Search Results: reese steadi~flex