Replacement Mirror For CIPA Universal Fit Clamp-On Towing Mirror

Question

Question:

First time I used it and the passenger side mirror flew off. Was able to recover but the mirror was completely broken. Is there any replacement mirror as I can still use the body even tho its scratch at several places Thank you

asked by: Danilo E

0

Expert Reply:

If the housing is still intact, you can use the Easy Cut-and-Stick, Acrylic Replacement Mirror from CIPA - 7" x 10" Sheet # CM01100 to fix the broken mirror on your CIPA Universal Fit Towing Mirror # CM11980.

expert reply by: Jason S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Yes, the K-Source Universal Towing Mirror - Clip On - Qty 1 Item #KS3891 will fit your 2016 Toyota Highlander. If you wanted two in a bundle you can order the K-Source Universal Towing Mirrors - Clip On - Qty 2 Item #KS3891-2.

view full answer...

Answer 4

Based off of the truck weight rating information you have told me, as long as you stay under 650 lbs of tongue weight the truck is capable of towing the 4,700 lb trailer. Using a weight distribution system does not lower the tongue weight of the…

view full answer...

Answer 5

The legs of the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT will fit the t-tracks of your Roll-N-Lock XT cover. We have had customers in the past use this in that fashion. The issues would come from the length of the crossbars. We…

view full answer...

Answer 6

For a 5000-lb travel trailer with tongue weight (TW) of 450-lbs you can use a weight distribution/sway control system such as the Equal-i-zer 4-Point Weight Distribution System #EQ37060ET which works effectively over a range of trailer TW from 200-…

view full answer...

Answer 7

Since your trailer is very close to 5,000 lbs your total tongue weight is very likely to exceed the 600 lb capacity of the 6k weight distribution hitch, so what you need is the 8,000 lb hitch, and I recommend the Fastway e2 (which is made by…

view full answer...

Answer 8

The Camco RV Power Defender Voltage Analyzer #CAM55310 that you referenced has an internal breaker that will automatically reset. You wouldn't need to reset it manually.

view full answer...

Answer 9

The Camco RV Power Defender Voltage Analyzer #CAM55310 referenced in your question features a 30-amp rating but it will not shut off automatically if the amperage rises. If you are over 30 amps, the breaker on the panel you are plugged into should…

view full answer...