Parts Needed For Yard Ramp Build

Question

Question:

Please quote the following 2 speed manual crank system 4 iron core poly wheels Tow boot Safety chains I’m looking for these parts to be similar to what these menlin guys are using on these mobile yard ramps. Thanks.

asked by: Michael

0

Expert Reply:

Making a custom ramp like this takes some unusual parts, but I think I can help. For the wheels, I recommend the Ultra-Fab Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 # UF48-979015.

For the 2 speed manual crank jack, I recommend the Square 2-Speed Jack - Drop Leg w/ Spring Return - Sidewind - 12-3/8" Travel - 10K # TJD2SP-12000SP-F.

I don't know what you mean by tow boot. I assume you want a combo bar like # E-9 or a receiver like # UF35-946401.

For safety chains, I recommend the Laclede chain with clevis slip hook # 1483-535-04.

These parts will help you build a similar yard ramp system.

expert reply by: Jason S

0

Answer 1

Yes, in order to use the Square 2-Speed Jack w/ Crank part #TJD2SP-12000SP-F in tandem you would need to obtain the correct follow leg which is the Square Direct Weld Jack part #TJD-12000SP-F2. The handle for this follow leg can be discarded as you…

view full answer...

Answer 2

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 3

Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a self adjusting set for…

view full answer...

Answer 4

I went out into our warehouse and pulled a set of the Ultra-Fab Rotating, Hitch Mounted Skid Wheels #UF48-979014 and found that the distance from the bottom of the wheel to where the bottom plate will be is 5-3/4 inches. Since the bumper you plan to…

view full answer...

Answer 5

The length from the bottom of the wheel to the top of the bracket on the Ultra-Fab Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 Item #UF48-979015 is 4-1/2".

view full answer...

Answer 6

I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This measurement…

view full answer...

Answer 7

From my research, I found that your Itasca Ellipse is just shy of 43 ft long. The only option we currently offer for RV's that are 34 ft or longer is the Ultra-Fab Skid Wheels for Class A RVs 34' and longer - 6 inch Diameter, part number…

view full answer...

Answer 8

Yes, the Ultra-Fab Hitch Mounted Steel Rollers #UF48-979018 do have a grease fitting on the end of the bolt that secures the roller to the rest of the assembly. Please refer to the photo I linked that shows the grease zerk fitting which allows for…

view full answer...

Parts Needed For Yard Ramp Build

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching