Wire Gauge Used for the Optronics Waterproof Trailer Wiring Harness # TLL56RK

Question

Question:

What guage is the wire on this light kit

asked by: Jim

0

Expert Reply:

The wire for the Optronics Waterproof Under 80 Inch LED Harness # TLL56RK is 20 gauge copper wire.

expert reply by: Jameson C

0

Answer 1

I went out to the warehouse and pulled the Waterproof, Under 80 inch LED Trailer Light Kit, item #TLL9RK, to see exactly what Optronics means by waterproof. Upon initial inspection the housing itself is not water tight. Water can access the housing…

view full answer...

Answer 2

I checked with my Optronics representative, who tells me that the 25 foot long wiring harness included with the #TLL9RK Standard Trailer Light Kit is constructed of 20 gauge wire.

view full answer...

Answer 3

The description of the LED Combination Tail Light Kit for Trailers under 80" Wide #TLL56RK does specify that the lights have a side marker function (in the second line under "Features"). I have added a link to a help article which…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Wire Gauge Used for the Optronics Waterproof Trailer Wiring Harness # TLL56RK

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching