Lightweight Platform Bike Rack for 2 Bikes and Fits a 1-1/4 Inch Hitch Receiver

Question

Question:

Is this the rack I need? 2 - bikes 1 1/4inch hitch What does this unit weigh?

asked by: Fred

0

Expert Reply:

The Hollywood Racks Trail Rider # HR200Z weighs approximately 40 pounds. It does carry 2 bikes and will fit 1-1/4 inch Class I and Class II trailer hitch receivers.

expert reply by: Charles S

0

Answer 1

Actually my boss here at etrailer has used the Hollywood Rack part #HR200Z and he really likes it. For the money you really can't beat it. It is built like a tank and is easy to use. The only downside to it's sturdiness is that it is…

view full answer...

Answer 2

For a 2 bike rack that we have tested and found is a fit on a 2015 Jeep Wrangler Unlimited very similar to your 2015 we have the Hollywood Racks part #HR200Z. Check out the review video I attached that shows the rack being demoed on the Wrangler as…

view full answer...

Answer 3

Yes, the Hollywood Racks Trail Rider part #HR200Z that you referenced can carry women's bikes pretty easily. If you check out the picture I attached you'll see a picture we got from a customer that is using this bike rack to carry a…

view full answer...

Answer 4

The Hollywood Rack Bike Rack part #HR200Z has a shank rise of 5 inches which means the curve you see in the shank (the portion that attaches to the trailer hitch and the rest of the rack), goes up a total of 5 inches for added ground clearance. See…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Lightweight Platform Bike Rack for 2 Bikes and Fits a 1-1/4 Inch Hitch Receiver

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching