Hitch Bike Rack Recommendation for 2015 Jeep Wrangler to Clear Rear Spare

Question

Question:

Recommended Hitch mount Bike rack for a 2015 Jeep Wrangler with spare tire mounted on the back

asked by: Scott D

0

Expert Reply:

For a 2 bike rack that we have tested and found is a fit on a 2015 Jeep Wrangler Unlimited very similar to your 2015 we have the Hollywood Racks part # HR200Z. Check out the review video I attached that shows the rack being demoed on the Wrangler as well.

expert reply by: Jameson C

0

Answer 1

Actually my boss here at etrailer has used the Hollywood Rack part #HR200Z and he really likes it. For the money you really can't beat it. It is built like a tank and is easy to use. The only downside to it's sturdiness is that it is…

view full answer...

Answer 2

The Hollywood Racks Trail Rider #HR200Z weighs approximately 40 pounds. It does carry 2 bikes and will fit 1-1/4 inch Class I and Class II trailer hitch receivers.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 5

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 8

Only certain bike racks are rated for use at the back of an RV or trailer but the Hollywood Racks #HR1400Z bike rack is not one of them. Generally, any rack that can fold or tilt, with few exceptions, won't be rated for this applications. The…

view full answer...

Answer 9

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 12

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Hitch Bike Rack Recommendation for 2015 Jeep Wrangler to Clear Rear Spare

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching