Will Curt Fifth Wheel and Gooseneck Wiring Harness for Aluminum Truck Beds Fit 2017 Ford F-250

Question

Question:

This product works with the aluminum body F150. Will it work with the 2017 F 250 aluminum body?

asked by: Rich

0

Expert Reply:

Yes, I confirmed with Curt that the # C57008 fifth wheel and gooseneck wiring harness will fit the 2017 Ford F-250 and the F-350.

expert reply by: Charles S

0

Answer 1

For a 7-way kit that is 10 feet long like you are wanting we have the part #41157 which would work well on your 2019 Ford F-350 to put an additional 7-way up in your truck bed.

view full answer...

Answer 2

I would be happy to help you. I recommend the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long item #C57008 for your 2020 Ford F-350. This is designed for aluminum beds like your model truck has. This harness puts a…

view full answer...

Answer 3

You can refer to the linked diagram for general guidelines about minimum clearances required when towing. If you have 8 or 9-inches of vertical clearance between the bed rails and the trailer you should be fine since 6-inches is considered adequate…

view full answer...

Answer 4

What I think you are asking is, will you need a slide type hitch for the 2022 Ford F-250 Super Duty with the short bed, 6-3/4' length that has the OEM Prep Package (puck system) when towing a 5th wheel RV. The short answer is no you do not have…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Will Curt Fifth Wheel and Gooseneck Wiring Harness for Aluminum Truck Beds Fit 2017 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching