Where to Find VIN Sticker on CE Smith Boat Trailer CE48810

Question

Question:

where is the vin located on these models? I cant findit. thanks

asked by: Christopher C

0

Expert Reply:

A trailer's VIN sticker will usually be found in a protected spot on the trailer frame, most often up near the tongue area facing inward to help avoid damage from road debris. You can also sometimes find it near or on the trailer axle(s). On a trailer kit like # CE48810 the axle is likely to be the spot to find the VIN.

expert reply by: Adam R

0

Answer 1

Yes, it would. The CE Smith Multi Sport Plus Boat Trailer item #CE48870 is the best option for your True Kit Discovery 400. This trailer fits boats up to 14' in length and has a capacity of up to 800 lbs. This trailer will be perfect for…

view full answer...

Answer 2

Since you have VIN number, you will simply need to get a bill of sale since he didn't have a title. The DMV won't have record of the trailer because it hasn't been registered with a title yet. With the VIN and a Bill of Sale,…

view full answer...

Answer 3

The psi of your trailer tires will be listed on the side wall. It will list the max psi which is what you will want to fill them to regardless of how much weight you have. For reference, the 4.80 x 12 tires we carry have a 60 psi max for load range…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 that you referenced was designed to be used with boats that are up to 14 feet in length like what you have now. I attached a picture that shows the range of where the winch…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

We have the CE Smith boat trailer part #CE48810 which is designed for small boats like your 12.5 foot Flycraft inflatable boat. I attached a picture that shows a similar boat loaded on this trailer as well.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 10

The CE Smith Boat Trailer #CE48810 that you referenced is indeed rated for sustained highway speeds. It is equipped with 4.80/4.00-8 bias ply tires that feature a maximum speed rating of 65 mph, which is the standard for most trailer tires. You…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Where to Find VIN Sticker on CE Smith Boat Trailer CE48810

Product Page this Question was Asked From

Continue Researching