Replacement Mounting Hardware Kit for Roadmaster EZ5 Base Plate Kit

Question

Question:

Item # RM-521448-5 Looking to purchase a mounting hardware kit only bolts, attachment plates, washers. Is that available? Thank you.

asked by: Richard O

1

Helpful Expert Reply:

For your Roadmaster EZ5 Base Plate Kit # RM-521448-5, you will use the Replacement Hardware Kit # RM-521448-5HK. This is designed for your existing base plates and will include all of the hardware needed for mounting them onto your vehicle.

expert reply by: Chris R

1

Answer 1

To flat tow your 2013 Jeep Wrangler Sport behind your RV you will need a Base Plate Kit, Tow Bar, Safety Cables, Vehicle Tow Bar Wiring, a Supplemental Braking System, and possibly a High-Low Adapter. There are a couple of great brands that we carry…

view full answer...

Answer 2

The Replacement Hardware for Roadmaster EZ5 Base Plate Kit #RM-521448-5HK is the hardware that came with the Roadmaster EZ5 Base Plate Kit - Removable Arms #RM-521448-5. This hardware kit is compatible with your 2017 Jeep Wrangler and that EZ5 Base…

view full answer...

Answer 3

The Roadmaster Falcon 2, part #RM-525, is a tow bar built to work with Blue Ox brand base plates. Most of the other tow bars we carry from Roadmaster are built to be used with Roadmaster base plates. If you write back with the year, make and model of…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 10

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Replacement Mounting Hardware Kit for Roadmaster EZ5 Base Plate Kit

Product Page this Question was Asked From

Continue Researching