Rhino-Rack J-Style Kayak Carrier Compatibility With Vortex Aero Crossbars

Question

Question:

Is it a correct assumption that the Rhino J-Style Kayak Carrier Item #S512 will fit on the Rhino Roof Rack 2500 series with the Vortex Aero crossbars?

asked by: Dean W

1

Helpful Expert Reply:

Yes. Your assuption is correct and confirmed. The Rhino-Rack J-Style Kayak Carrier # S512 is a confirmed fit for Vortex Aero Crossbars.

expert reply by: Jason S

1

Answer 1

The weight capacity of the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-120B is 220 lbs and is a dynamic weight rating. That means it's the weight you could have on the bars while driving. It doesn't have a static rating…

view full answer...

Answer 2

Your 32 inch wide kayak will fit great in the Rhino-Rack J-Style carrier #S512. In addition to resting on the carrier the kayak will also be secured using straps at each of the J-cradles as well as at the box and stern so it will be safe and…

view full answer...

Answer 3

I was able to go to our test fit bays and use a digital dial caliper to measure the top channel on the Rhino Rack Vortex Aero Crossbars #RRVA126B-2, that with the SX Series Legs #RRSX100 are confirmed to fit your 2015 Toyota Sienna with factory…

view full answer...

Answer 4

The correct Rhino-Rack setup for the flush rails on your 2018 Mitsubishi RVR include the following: 49" Vortex Aero Crossbars - #RRVA126B-2 SRB Legs - #RRSX031 So the SX031 legs are definitely what you're needing. I think the problem is that…

view full answer...

Answer 5

The opening on all of the Rhino-Rack Vortex crossbars measures 300mm which is about 11-13/16" so that means for 65" Vortex bars #RRVA165B-2 we are looking at about 41-3/8" between where the legs #RRRCL4 will butt up to the crossbar.…

view full answer...

Answer 6

The Rhino-Rack Vortex Aero Roof Rack System, which consists of #RRVA137B-2 for the two 54 Inch Vortex Crossbars, #RRRLKVA for the 2500 Series Legs, and #DK357 for the Custom DK Fit Kit, is confirmed to fit your 2017 Ford C-Max and is a great choice.…

view full answer...

Answer 7

Yes, the Rhino-Rack Vortex Crossbars #RRVA118B-2 will work with your Malone SeaWing #MPG107MD kayak carrier. The Vortex bars are aero, and the SeaWing is compatible with aero, round, square, oval and elliptical crossbars. You may also be interested…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...