Available Trailer Fender Mounting Brackets

Question

Question:

where on your web site can i find fender bracket for this item on your website F008559

asked by: Manny B

0

Expert Reply:

We offer fender mounting brackets in various sizes and types that you can see on the linked page. The best option for any particular fender will depend on the nature of the specific trailer. Both L-shaped brackets like # PF775-BKT and U-shaped brackets like # PF1135-BKT are available.

expert reply by: Adam R

0

Answer 1

Yes, you can go with hub #AKIHUB-545-2-G-1K since it uses the same bearings and seal size as your regular hub #AKIHUB-440-2-G-1K. Keep in mind that you will also have to switch to wheels with the 5 on 4-1/2 bolt pattern. I would assume you are…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Yes, they will. The B&W Custom Installation Kit w/ Base Rails item #BWRVK2604 are confirmed to fit the 2023 Ram 1500's without a diesel engine. These fit both the 5-1/2' and 6-1/2' bed lengths. These custom fit brackets mount in…

view full answer...

Answer 5

For your NEO NMS2685TR with the enclosed V-nose, the Reese Friction Sway Control Kit #83660 is the best option. Because of the length of your trailer, two are recommended. You can use the Reese Sway-Control Bracket for 2" Ball Mounts #RP26003…

view full answer...

Answer 6

What you'll want to do is refer to your instructions for the proper torque specs. For example, the instructions for the 5.2K - 6K Kodiak Disc Brake Kit #K2HR526D call for the brake mounting flange to be welded to the spindle and then the caliper…

view full answer...

Answer 7

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Available Trailer Fender Mounting Brackets

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching