Galvanized Steel, U-Shaped, Bolt-On Bracket for Plastic, Single-Axle Trailer Fender PF11X35W

See what our Experts say about this Redline Accessories and Parts

• Recommended Trailer Fender and Lights for Boat Trailer with 13" Wheels
  You can use the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 which are designed to be used with wheels up to 14" large, so they'll work with your 13" wheels. To mount these fenders you'll want to use the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic # PF775-BKT-2; you could also use the existing brackets you've got on your trailer if you'd like. For the lights, you can use the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle...
  view full answer...
  
• Brackets Needed to Mount Fulton Single Axle Trailer Fenders with Top and Side Steps F008584-2
  You will need 4 of bracket # PF1135-BKT to mount fenders # F008584-2. Because your frame is so narrow you will need to drill a hole in each bracket to accept u-bolts that fit around your frame. We do have some 1-1/2 inch wide, 5 inch long u-bolts you could use, # SP01-120, sold as a pair. You would need 2 pair. If you don't mind drilling into the trailer frame you could also use # PF775-BKT-2 and place them wherever you can on both the fender and the trailer. You would need 2 pairs of...
  view full answer...
• Recommended Mounting Bracket For Fulton Single Axle Plastic Fender
  We do carry mounting brackets that are designed for plastic trailer fenders like the Fulton Single Axle Fender # F008582. I recommend a bracket like part # PF775-BKT-2. I have attached a photo of the mounting bracket with the dimensions noted you can check out.
  view full answer...
  
• Width of Holes for U-Bolt on Bracket # PF1135-BKT
  The width of the holes you mentioned are .55 inches.
  view full answer...
  
• Dimension of Mounting Hole on Redline Trailer Fender # PF11X35W
  I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them compatible. The recommended bracket for this fender is the # PF1135-BKT, this bracket works well for mounting fenders to a boat or other open sided trailer. The brackets use u-bolts to attach to the trailer frame and then the fenders mount to...
  view full answer...
  
• Available Trailer Fender Mounting Brackets
  We offer fender mounting brackets in various sizes and types that you can see on the linked page. The best option for any particular fender will depend on the nature of the specific trailer. Both L-shaped brackets like # PF775-BKT and U-shaped brackets like # PF1135-BKT are available.
  view full answer...
• How to Choose Replacement Black Step Fender for Boat Trailer
  We categorize our fenders by the size wheels they're compatible with, as you can see by clicking the link I've provided for you. I don't have any reference that will tell me the exact replacement fender that's needed for your boat trailer, but I'm sure we'd have a fender that would work for you. It sounds like the Fulton Single Axle Trailer Fender with top and side steps might be what you're needing. They're available for 12 inch wheels part # F008582, 13 inch wheels # F008583, 14 inch...
  view full answer...
• Replacement Fenders And Brackets For An Older Karavan Trailer
  I can definitely help point you in the right direction, but we do not offer a universal fender for a Karavan trailer. Fitment mostly depends on the wheel size. Looking at these different Karavan trailers, it appears some models use a plastic fender with a step, and other use just a basic fender with no step. For example, if you have 12" wheels, a very common fender is the Fulton # F008572. This fender has steps and measures 33-1/2" long, 7-1/2" wide and 8-3/4" tall. This fender will go...
  view full answer...

Do you have a question about this Accessories and Part?