Reese Revolution Pin Box Grease Maintenance

Question

Question:

Does it need to be lubricated? Where does it need it?

asked by: Rene B

0

Expert Reply:

Yes, you will need to grease the skid plate and around the wedge on the Sidewinder/Revolution. I have included a picture from the instructions for Sidewinder # RP61412 showing where the grease needs to go. You can use grease # L11390.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 4

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 5

Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated I'd recommend going with the Gen-Y #325-GH-8040 shock absorbing pin box versus a Trailair Flex Air like part #LC328492. The Trailair features a…

view full answer...

Answer 6

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 7

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 8

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 9

Yes, the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs #AL52300 although designed for the LoadLifter 5000 and the LoadLifter 5000 Ultimate air springs will also work with the #AL57595 XL springs. Both kits…

view full answer...

Answer 10

The manufacturer and model number of the pin box is usually printed on a sticker or stamped into a plate or directly into the metal of the pin box. If you can't find that, the manufacturer of your 5th wheel should be able to tell you which pin…

view full answer...

Answer 11

The difference between the 1621 and the 1621SHD is weight capacity and how many bolts is required to mount it. The 1621 uses 4 bolts for mounting. The 1621SHD requires all 6 bolts to be used.

view full answer...

Answer 12

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Reese Revolution Pin Box Grease Maintenance

Product Page this Question was Asked From

Continue Researching