Recommended Backup Camera System For 2012 Chevy Silverado 1500 Crew Cab 4x4 5.8 ft Short Bed

Question

Question:

Do I need a 5ft cable extension if I put the monitor in the center of the dash in the little cubby hole next to the glove box? Is there a larger monitor maybe 7inch to 10inch available with the same features as the OEM? Direct plug in? I put another brand on my Ford super crew XLT and was very disappointed at picture quality .but it was a Christmas gift from wife , she was very excited thinking she did good , the sad part was she paid a good amount for it . Read great reviews about this product thought I would give it a try on the new truck

asked by: Anthony C

0

Expert Reply:

The Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 is a nice system. Depending on how you run the wire, you may need an extention. We have a 5 foot extension # HM3100504060 and a 25 foot extension # HM3100504061. There isn't an in-between size.

If you want a larger monitor, I recommend the Rear View Safety Backup Camera System with Flush Mount Camera # RVS-7707721.

If you want an alternative monitor option, I recommend the Rear View Safety Backup Camera System - Mirror Monitor - License Plate Mounted Camera # RVS-778718N.

expert reply by: Jason S

0

Answer 1

I do have options for you but there is not a cargo light camera kit offered for a 2012 Chevrolet Silverado 3500. Instead, you will want to use a wireless hitch alignment camera kit. I recommend the Swift Hitch Digital Wireless Hitch Alignment…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

I'm happy to confirm that yes, the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 with the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200, and the Draw-Tite 5th Wheel/Gooseneck…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I have a complete replacement camera system option for you, but since your current camera system is no longer made there are no replacement cameras available that use your same monitor. I recommend replacing it with the Voyager WiSight 2.0 Wireless…

view full answer...

Answer 8

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 9

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...