Mounting 3 Inch Round Westin Nerf Bars To 2004 Chevy Silverado 2500 Extended Cab

Question

Question:

hello, im trying to mount 3 in round westin nerf bars from a 99 k1500 chevy onto my newer 04 chevy silverado 2500 hd both were extended cab and trying to determine the right parts kit i would need

asked by: Keven A

0

Expert Reply:

If you have the E-series bars, you will want the Replacement Hardware for Westin E-series Step Bars # 23-168PK. If you have the 25 or 26 series bars, you will want Replacement Hardware for Westin 25 and 26 series Step Bars # 25-168PK.

expert reply by: Jason S

0

Answer 1

The correct replacement hardware for the Westin Platinum Series Nerf Bars on your 2001 Chevy Silverado is part #25-168PK. They're designed to fit certain GM trucks from the early 2000's. I've attached the install details as well as an…

view full answer...

Answer 2

Mounting brackets are specific for trucks and the running boards, so you can't just match brackets to the truck or running boards individually. They would need to be matched to the truck and running boards both. That being said, I can tell you…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Installing the Union Tee #AL21838 with your #AL57575 will tie the pressure of the two air bags together. So yes, a shift in a very heavy load like a truck camper will potentially result in air being forced from one into the other. The reason I say…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, the Torklift Class V hitch part #TLC1205 would be a great option for your 2002 Chevy Silverado 2500HD long bed. If you instead had a short bed truck you would want the part #TLC1204. The 17k capacity is more than what your truck is rated for so…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, the replacement hardware kit you're looking for on your 2002 Chevy Silverado 1500 is the following: - Replacement Mounting Kit #23-140PK

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Mounting 3 Inch Round Westin Nerf Bars To 2004 Chevy Silverado 2500 Extended Cab

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching