Parts Needed to Tow a Trailer with a 1999 Saab 9-3
Question:
Hi I have a SAAB 9-3 Convertible, I have installed a Curt hitch on it just for my bikes. But I am thinking of buying a canoe trailer. Light and easy trailer. But - how hard is it to make the wiring? And what do I need for Product?
asked by: Urban A
Expert Reply:
Your 1999 Saab 9-3 uses a wiring harness with a powered converter to protect the vehicle's wiring. You can use the Curt # C59236 for a 4-way connector. This will power the running, brake, and turn signals of a trailer. I've attached an install video for your. Although it's on a BMW the process will be very similar.
You also may need a ball mount like the Curt # C45521. This ball mount provides either 2-5/8 inches or rise or 7-1/4 inches of drop. To find the correct rise or drop you need check out the article I linked. Once you know what you need I've also linked our selection of ball mounts to fit your Saab's hitch.
You'll also need a pin and clip, # F-4 and a hitch ball either a 2 inch, # A-82 or 1-7/8 inch # A-80.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Availability Of Trailer Wiring Harness For A 2024 Toyota Grand Highlander
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What Does the Curt Hitch Look Like When Installed on a 2024 Toyota Grand Highlander?
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Does Curt Hitch C12130 Fit 2008 Mercury Grand Marquis