Locking Hitch Pin and Anti-Rattle Device for a Solid Shank 2 Inch Hitch Accessory on 2016 Outlander

Question

Question:

anti-rattle locking hitch pin for non-hollow application Do you have the above pin that we can use on a solid core hitch adapter. We need to raise our tri-lift and the curt adapter works. However, the shaft is solid and cant use the hitch pin you in the unit for anti-rattle and locking pin. HELP! The adapter fits perfectly on our Mitsubitshi Outlander 2016 and does not interfere with the bumper. We have a Curt hitch and it does extend out enough to allow for the raised adapter. But we cant find an anti-rattle pin that works.

asked by: Don E

1

Helpful Expert Reply:

There isn't an anti-rattle locking hitch pin that works with a solid ball mount or other hitch accessory. You can use a regular hitch lock and then an anti-rattle device separately. For a lock for a 2 inch Class III trailer hitch you can use # e98880.

For an anti-rattle device you can use # RM-061 which reduces movement vertically. Or you could use # BX88224 which reduces movement vertically and horizontally. I have linked videos of both devices for you.

expert reply by: Michael H

1

Answer 1

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 5

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Answer 6

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 7

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Locking Hitch Pin and Anti-Rattle Device for a Solid Shank 2 Inch Hitch Accessory on 2016 Outlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching