Outside Dimensions of the Aries Headache Rack # AA111001

Question

Question:

what are the inside dimensions of #AA111001 where it bolts on the truck bed.

asked by: Cliff

0

Expert Reply:

I spoke to my contact at Aries and he informed me that the outside to outside dimension of the upright portion of the Aries Headache Rack # AA111001 is 70 inches but then if you wanted from the insides of the brackets it measures 69-1/2 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The outside uprights on the Aries Headache Rack #AA111001 referenced in your question bend inward at a 21 degree angle about 3 inches up from the base. The uprights then straighten back up as they reach the top making another 21 degree angle. I have…

view full answer...

Answer 2

The blue wire coming from the brake controller to the trailer brakes is the brake power output wire used to tell the trailer to apply the brakes once given the response from the brake controller. Therefore, you should not have a constant charge to…

view full answer...

Answer 3

If you have the caution screen that says power loss on it then this means that the power to the controller is being interrupted while braking. This is most likely an issue on the black power wire for the controller and how it attaches to the truck.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 9

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

view full answer...

Answer 10

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM-205249-10, I recommend using the Mystik JT-6 part #L74FR. This is a marine grease that is very similar to what comes with their sway bars.

view full answer...

Answer 11

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 12

Yes, you can hook up a power inverter to input one and then shore power to input two on the Furrion Automatic Transfer Switch part #F30ATS. The dip switch will then need to be in the off position in order for the power to transfer instantly without…

view full answer...

Outside Dimensions of the Aries Headache Rack # AA111001

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching