Parts Included in Timbren Rear Suspension Enhancement System TDR2500CA

Question

Question:

What are the dimensions of the dr2500ca. Do they come with a spacer disc.

asked by: Joe D

0

Expert Reply:

The Timbren Rear Suspension Enhancement System # TDR2500CA includes the jounce springs, mounting brackets, hardware and two 1-inch spacers as shown in the linked photo. Please note this kit is NOT a fit for your 2016 Ram 2500; it fits various Ram pickups up to the 2013 model year. I did go to the warehouse to measure the springs themselves; they are 5-inches tall and 3-inches in diameter at the top and bottom.

For your 2016 Ram 2500 the Timbren rear-axle kits we offer are shown on the linked page.

expert reply by: Adam R

0

click to enlarge

Answer 1

I tried looking up the part TD2500D that you referenced but I couldn't find anything. The Timbren Rear Suspension Enhancement System #TDR2500D that fits your 2015 Ram 2500 is rated for 8,600 lbs as listed on our site. I verified this with…

view full answer...

Answer 2

I would be happy to help you set up your 2021 Ram 2500 for a smoother ride. I recommend the SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle item #SS27GR. These will be a better addition to your truck than the Timbren system item…

view full answer...

Answer 3

The sag you are experiencing when towing with your 2020 Ram 2500 is normal due to the weight that has been added to the rear of your truck, but you definitely want to add rear suspension enhancement to even it out. The reason is, with the sag, the…

view full answer...

Answer 4

For the rear of your 2008 Dodge Ram 1500 two wheel drive quad cab, the Timbren Rear Suspension Enhancement System part #TDR1525H4 would be correct for you. However, if you have the mega cab model then you would want part #TDR2500CA. Both the mega cab…

view full answer...

Answer 5

For transporting heavy loads often on your 2007 Ram 1500, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS4618-H. The great thing about the RoadActive leaf spring enhancements is that they eliminate axle wrap, reduce…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Parts Included in Timbren Rear Suspension Enhancement System TDR2500CA

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching