Available Replacement RV Shower Curtain Rods

Question

Question:

I have a corner stand up shower and need a neo angle curtain rod would this work for me and also do the ends swivel so they go on the angle I need for my corner stall ? Tks

asked by: Dave M

0

Expert Reply:

We offer folding RV shower curtain rods in two sizes, both of which can be seen on the linked page. Lengths offered are for 35 - 42-inch showers and 54 - 60-inch showers and we have bronze, chrome, satin nickel and white finished available. You can just click on your preferred size and color.

These shower curtain rods feature 3 hinge points and pivoting end pieces (see photo please).

expert reply by: Adam R

0

click to enlarge

Answer 1

The Curt Pop-In Ball, part #C60629, has a shank with a diameter of 2-1/4 inches and is 3 inches long. It&#39;s designed specifically to fit the factory gooseneck hitches that are an option with newer model Fords, GMs, and Nissans. If this is…

view full answer...

Answer 2

The OEM prep package consists of 4 &quot;pucks&quot; in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these…

view full answer...

Answer 10

Installation of both the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1394 for your 2002 Ram 2500 and #BWGNRK1308 for your 2009 Ram 3500 Mega Cab short bed will not require the bed to be lifted or disconnected in any way. The…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from…

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

view full answer...

Available Replacement RV Shower Curtain Rods

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching