Which SuperSprings Kit is a Fit for a 2014 Ford F-150

Question

Question:

what is the max size i can use for a2014 f150 supercab 373 rearend 10 ply tires and factory tow pkg

asked by: Bruce U

0

Expert Reply:

The correct SuperSprings kit for your 2014 Ford F-150 is the part # SSA28 which is a confirmed fit and will provide an additional 1,500 lbs of suspension support. There isn't a different fit that has a higher capacity.

expert reply by: Jameson C

0

Answer 1

Since you do not have the 8,200 lb pay load the #SSA28 would not be the right kit for you, but we do have solutions that would work great for your 2014 Ford F-150. The two most popular options are the Timbren part #TFR1504D and the Firestone Ride…

view full answer...

Answer 2

I watched an installation video for SuperSprings #SSA28 on a newer Ford F-150. The spring that has the SuperSprings decal on it was used on the passenger's side with the decal side forward of the tire. If you notice, the springs have a certain…

view full answer...

Answer 3

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit part #SSA28 is an excellent option for your 2014 Ford F-150. It's going to help level the ride if you are towing or loaded as well as help to prevent body roll and shifting loads.…

view full answer...

Answer 4

The adjustment procedure you mentioned of tigthening the adjustement till you can't turn the wheel by hand and then backing off 10 clicks is the standard way to adjust brakes and would be the correct way to adjust the Hydraulic Brake Kit…

view full answer...

Answer 5

For your replacement Dexter hydraulic brake assemblies, you will want the Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies #23-312-313. These will work very well with your existing hub/drum assemblies.

view full answer...

Answer 6

Do you by chance have a 3,500 ALKO axle 8500? Or an 8,500 lb axle? I believe you'd have the 3,500 lb axle but wanted to be sure. For 3,500 assemblies you'd want the part #AKFBBRK-35-D as replacing all of the individual parts you mentioned…

view full answer...

Answer 7

The best replacement brake kit assembly that you're looking for is one that we have branded under the etrailer name: - Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D This has the…

view full answer...

Answer 8

The Dexter Hydraulic Trailer Brake Kit #23-312-313 that you referenced are standard uni-servo assemblies and are not free-backing. These will not automatically disengage when going in reverse with the trailer. For 3,500 pound free-backing assemblies…

view full answer...

Answer 9

I spoke with my contact at Dexter and he informed me that the Deluxe Hydraulic Line Kit #9579-2 that you referenced is used for trailers with torsion axles. The Hydraulic Line Kit #9505 that you referenced is designed for basically any other design…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Which SuperSprings Kit is a Fit for a 2014 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching