Recommended Thule Hitch Mount Bike Rack for Bikes with 27-1/2 Inch Tires

Question

Question:

The manual for this rack states that it will accommodate wheel sizes 26-29. My assumption would be that it would accommodate 27.5inch wheels. Thanks!

asked by: Chris S

0

Expert Reply:

The Thule Helium Bike Rack for 2 bikes will work perfectly with your 27-1/2" wheels. I've attached a review video for you to take a look at as well.

expert reply by: Charles S

0

Answer 1

I got you girl! From all the different bike racks we have down here in etrailer, there are a select few that I actually enjoy lifting and installing by myself. As another strong but small independent woman, I understand the struggle. Attached at…

view full answer...

Answer 2

The Yakima BackSwing #Y02483 will work with any bike rack that has a 2 inch shank. Unfortunately, it cannot be used with reducers, extenders, or adapters. So if your Kuat has a 2 inch shank, you are good to go.

view full answer...

Answer 3

As long as your 2020 Toyota Highlander XLE has a 2" hitch receiver then the Yakima BackSwing #Y02483 will work just fine and allow you to install a bike rack that swings away from the back of vehicle. It looks like all of the available…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Recommended Thule Hitch Mount Bike Rack for Bikes with 27-1/2 Inch Tires

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching