Distance Between Loops on 8 Inch Roadmaster Safety Cables

Question

Question:

Looking at the 8 inch Safety Cable. What is the length between the two loops on the ends?

asked by: Keith H

0

Expert Reply:

The 8 Inch Roadmaster Safety Cable Extensions # RM-910648-8 measure approximately 3-1/2 inches between the loops.

expert reply by: Charles S

0

click to enlarge

Answer 1

I spoke to my contact at Roadmaster about the RoadMaster 8" Safety Cable Extensions part #RM-910648-8 and they stated that each cable is rated for 8,000 lbs but that does not means it will give you 16,000 lbs in total as if one were to break,…

view full answer...

Answer 2

Extending out the safety chains is definitely something that has to be done with the Swagman Original 4 Bike Towing Rack #S64675. The RoadMaster 8" Safety Cable Extensions #RM-910648-8 will help get the job done but I do recommend picking up…

view full answer...

Answer 3

Roadmaster lists the height of the baseplate attachment point on a 2022 Jeep Wrangler Rubicon with factory tires at 16-1/4". This means you're 7-3/4" off from level and would need to use a high/low adapter like the Blue Ox #BX88241.…

view full answer...

Answer 4

When using D-ring adapters to flat tow your Jeep like what it sounds like you're doing, safety cables will generally just need to be attached to the vehicle's frame. What you can do is use some short cables to wrap around each frame rail and…

view full answer...

Answer 5

I have a solution for you, but I do not think getting a longer hitch pin is the answer. From the picture you provided, it looks like it is the S-hook of the safety cable that is getting behind your hitch pin and the pushing into the hitch lock side…

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

It sounds like you have the older hub 22834 that is no longer in production that takes the outer bearing of part #1779 and inner bearing of part #2788. I was not able to find any other bearings that measure .093" inner diameter besides 1779 or…

view full answer...

Answer 8

We do have installation instructions for the EcoHitch Invisi Trailer Hitch Receiver #306-X7186 and I have sent them to you in a separate email. As you mentioned in your question, there are 3 trailer hitches available for your 2012 Chevy Volt and they…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Distance Between Loops on 8 Inch Roadmaster Safety Cables

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching