Will Front-Mount Trailer Hitch On 2016 Ram 2500 Interfere With Front Parking Sensors

Question

Question:

will this product work with the bumper mounted location safety sensors installed on my 2016 Ram 2500 Laramie? 65063

asked by: Charles

0

Expert Reply:

When the Draw-Tite Front Mount Trailer Hitch, part # 65063 is installed it fits in the long opening in the front bumper of your Ram. The tow hooks are removed and then re-installed once the hitch is in place.

It looks like the sensors are located on the lower part of the bumper but you may have sensors installed inn other locations on your Ram. You can take a look at the included installation instructions to make sure it does not interfere with the sensors.

expert reply by: Jeffrey L

0

Answer 1

For your 2018 Ram 2500 we have two front hitches that are confirmed as a fit. We have the Draw Tite part #65063 which has the hitch opening much higher as it comes out of the lower bumper or we have the Curt part #C31015 which has the hitch opening…

view full answer...

Answer 2

We have a front hitch that fits your 2019 Ram 2500 diesel with the part #C31089 but the #DT36MR does not fit the diesel models.

view full answer...

Answer 3

You would most likely have to fold Tonneau cover #BAK72310 all the way up in order to have enough clearance to couple to the gooseneck hitch and/or have enough clearance to safely tow the trailer without damaging the cover. But when folded up all the…

view full answer...

Answer 4

The reason you need the factory tow hooks on your 2014 Ram 2500 to install the Draw-Tite Front Mount Trailer Hitch Receiver #65063 is because the manufacturer designed the hitch to install between the tow hook mounting brackets and the tow hooks.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Will Front-Mount Trailer Hitch On 2016 Ram 2500 Interfere With Front Parking Sensors

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching