Replacement Keys Needed For Diversi-Tech Locking Ball Mount

Question

Question:

I added some pictures. Any help would be appreciated.

asked by: Alicia

0

Expert Reply:

We do sell replacement keys. I would need to know what hitch you are referring to. Brand, Size, and any numbers would be needed. Also a close up picture is very helpful to us in assisting you and your dad.

expert reply by: Jason S

0

click to enlarge

Alicia

12/19/2016

I added some pictures. Any help would be appreciated.

Reply

Jason S.

12/19/2016

Thanks for the pictures. They were a huge help. I'm really glad that I'll be able to help you out. What you need is the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks, # DTLBM02RK. This will allow you to change out the locking cylinder and have the new keyed cylinders to replace it. This kit comes with 2 cylinders and 4 keys.

Reply

Jason S.

12/19/2016

Thank you for the pictures. They were very helpful and I'm happy to say that I have a solution for you. The Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks, # DTLBM02RK, is what you will want for your Diversi-Tech locking ball mount. This kit will come with two cylinders, four keys, and the tool to replace them.

Reply

Answer 1

You can purchase Re-Keying Kit, #DTLBM02RK, to re-key your ball mount. The kit includes a tool to remove the locking cylinder you have in the ball mount now. Once you receive the kit, you will need to put some air tool oil in the hole that the lock…

view full answer...

Answer 2

The set screw that holds the locks such as #DTLBM02RK to the ball mount is a 0.05 inch so you would need a 0.05 Allen wrench. But if it is stripped at the screw too you may need to just try numerous sizes to find one that fits the best. That is…

view full answer...

Answer 3

If the ball mount you have is a Diversi-Tech or a Fastway (the new brand name) then what you'll want to do is get the re-key kit part #DTLBM02RK so that you can remove your old lock cores and install new ones that will function properly.

view full answer...

Answer 4

You can order replacement keys for your Diversi-Tech aluminum adjustable ball mount. You will just need the number off of your existing key and then type in #DTKEYR(followed by your key number). We have all currently available replacement keys listed…

view full answer...

Answer 5

In order to obtain extra keys for the Fastway Trailer Hitch Receiver Lock part #FA86-00-3160 you would need to first order the lock separately. Then once you obtain the lock you can look to see what key code you have. Once you know this you can then…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Replacement Keys Needed For Diversi-Tech Locking Ball Mount

Product Page this Question was Asked From

Continue Researching