What Is the Shaft Tube Inside CE Smith Boat Trailer Roller CE29560 Made Of

Question

Question:

What is the material of the internal shaft through the core of the roller? Steel, aluminum, ...?

asked by: Richard R

1

Helpful Expert Reply:

The inner piece of CE Smith roller # CE29560 is nylon. These pieces are usually just in a few inches at the ends of rollers for extra support and don't go through the hole length of the roller. For a shaft for this roller you can use # CE10705A which is zinc-plated steel.

expert reply by: Michael H

1

Answer 1

The plastic bushing that is on the inside of the Yates Side Guide Roller for Boat Trailers #YR12243-4P is attached to the rest of the roller and does not spin independently of the roller. As long as you use the correct size shaft with this roller…

view full answer...

Answer 2

If you wanted to cut down the Yates Side Guide Roller #YR12243-4P that you referenced you certainly could. It's made of rubber so it would cut pretty easily.

view full answer...

Answer 3

You may be able to use the 12-3/4" x 1/2" Roller Shaft with Pal Nuts #CE10705A with the Yates Side Guide Roller 12" Long - 1/2" Shaft #YR12243-4P, but it won't give you much space to work with. A better option is to use the…

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

What Is the Shaft Tube Inside CE Smith Boat Trailer Roller CE29560 Made Of

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching