What Is The Dimension Of The Square Block In The Hitch Receiver Hardware For The Draw-Tite 75876?

Question

Question:

2015 Forester. What is the length and width of the square holed spacer block which is placed inside the frame along with the bolt?

asked by: Steven

0

Expert Reply:

The square block you are asking about for the Draw-Tite Max-Frame Trailer Hitch Receiver, # 75876, for your 2015 Subaru Forester is 2 inches by 0.880 inch and 0.109 thick. I've attached a photo to help.

expert reply by: Jason S

0

click to enlarge

Answer 1

For the Draw-Tite hitch #76182 we have not yet had a local customer bring in their 2018 Forester for an install so in order to give you the installed height dimension I went to our warehouse and took a measurement of this hitch. The hitch bolts to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Yes we do, we have plenty to choose from. For your 2024 Toyota RAV4 I recommend checking out the Curt Trailer Hitch Receiver #C13416. This hitch has a 4,000 lb maximum capacity, a 600 maximum tongue weight capacity, and is made in the USA.…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 11

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 12

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

What Is The Dimension Of The Square Block In The Hitch Receiver Hardware For The Draw-Tite 75876?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching