Will Dee Zee Custom Truck Bed Mat DZ87012 Fit 2017 Ford F-250 8-Foot Bed

Question

Question:

What is a step gate on a pick up truck bedliner?

asked by: Michael

1

Helpful Expert Reply:

Some Ford trucks have a tailgate with a built-in step/handrail set-up to make it easier to get up into the bed. If you Google search on 'Ford step gate' you'll be able to see these. The Dee Zee truck bed mat # DZ87012 will work on your 2017 Ford F-250 with or without this feature. This high-strength mat will resist cracking and damage from most chemicals. It is USA-made and is a confirmed fit for your long bed Ford pickup.

expert reply by: Adam R

1

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

I recommend using a Lube Plate #16721 over covering the Demco Recon 5th Wheel Trailer Hitch #DM8550043 in Grease #L74FR. The lube plate is much cleaner and you will not have to constantly clean off the dirt and apply new grease over time.

view full answer...

Answer 4

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 5

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 6

Hey Michael, so for your 2024 Ford F-250 SumoSprings does have a Rebel with a lower weight capacity at 3,000 lbs with the part #SSR-129-40-2. This would do a great job of giving you the additional support you are wanting without making the ride so…

view full answer...

Answer 7

We do have the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR which installs into your factory in bed hitch on your 2024 Ford F-250. This will provide you with a 2-5/16" hitch ball which is offset 5" from the factory mounting location. You…

view full answer...

Answer 8

Hey MIchael, some play like that is normal with the Gen-Y ball part #GY43XR so I wouldn't worry too much about it.

view full answer...

Answer 9

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 12

We do have an offset gooseneck that will fit your 2023 Ford F-250 Super Duty, but the part you mentioned is not a fit for your truck. Instead, what you will need is the following: - Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems -…

view full answer...

Will Dee Zee Custom Truck Bed Mat DZ87012 Fit 2017 Ford F-250 8-Foot Bed

Product Page this Question was Asked From

Continue Researching