Do Friction Sway Control Balls Get Greased and are 2 Required for a 27 Foot Trailer
Question:
Do the ball mounts need to be greased? I have greased mine and when I take it off to back up, my wife invariably brushes against them getting grease on her clothes. Is a second sway bar needed for a trailer total length 27foot 7? I am not having sway issues with just one, but saw other responses indicating you recommend 2 for anything over total length of 26. Thanks!
asked by: Tim
Expert Reply:
It is not necessary to grease the small balls used by friction sway control units such as # 17200. But it also would not hurt anything and having some lubrication is definitely better than none.
Two units are recommend for trailers over 26 feet and/or if the trailer weighs between 6,000 and 10,000 pounds. If you are not having sway issues though you could hold off since it isn't required that you have 2 it will just work better if you did have 2.
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Replacement Ball for Curt Friction Sway Control System
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Q&A: Comparing the Curt MV C17063 and Husky Center Line HT32218 Weight Distribution Systems
- Q&A: Can the Curt Friction Sway Control 17200 be Mounted on Driver Side
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 10K GTW - 1K TW
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
- Video: Curt Weight Distribution - Sway Control Only - 17200 Review
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Shop: Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Search Results: sway bar mount
- Shop: Vehicle Sway Bars
- Search Results: sway control bars
- Q&A: Should a Reese Friction Sway Control/Weight Distribution System be Greased
- Video: Review of CURT Weight Distribution Hitch - MV 14K W.D. with Sway Control - C17063
- Q&A: Weight Distribution System Vs Friction Sway Control Bar
- Q&A: Can Curt Friction Sway Control 17200 be Mounted on Either Side of Trailer
- Shop: Carr LD Custom Fit Side Steps - Black Powder Coated Aluminum - 14" Step - 1 Pair
- Shop: Nerf Bars - Running Boards
- Q&A: Where to Mount the Curt Friction Sway Control Bar on a Trailer
- Q&A: Does Curt 17200 Sway Control Need to Be Removed To Back Up Trailer
- Video: Curt Weight Distribution Systems Friction Sway Control Review
- Video: Carr LD Custom Fit Side Steps Review
- Video: Curt Weight Distribution Systems Friction Sway Control Installation - 2011 Forest River R-Pod Travel
- Video: Customer Review - Curt MV Weight Distribution System
- Video: Curt Weight Distribution System Installation - 2003 Ford F-250
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Hitch