Operator Assembly that Fits Ventline Roof Vent with Old Style Round Lid BV0554-01

Question

Question:

do you have a crank assembly that fits the ventline cover bv0554-01

asked by: Diane L

0

Expert Reply:

Yes, for a Ventline vent that would use the vent lid part # BV0554-01 the correct operator is the part # BV0115-04.

expert reply by: Jameson C

0

Answer 1

I have confirmed with my contacts at Ventline, and the correct replacement operator for the Ventline Dome #BV0554-01, that you are using on your trailer is the #BV0115-04. This replacement operator has a different style of handle than what you…

view full answer...

Answer 2

For your Ventline V2119 Series vent with the older-style rounded dome, you will want to use the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents, White #BV0554-01 or Smoke #BV0554-03. For the operator, you will want the Replacement…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 5

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 6

I reached out to my contact at Ventline and confirmed the correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well…

view full answer...

Answer 7

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to make…

view full answer...

Answer 8

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

view full answer...

Answer 9

It sounds like you have a Heng's Roof Vent 122112. This is known as the Ventline Old Style Rounded Dome Trailer Roof Vent. Replacement parts are, #BV0554-01 for white or, #BV0554-03 for black. This will be the continuous hinge style. Please…

view full answer...

Answer 10

We don't carry Dexter leaf springs, but we do offer the 4,500, 26 inch long center eye to center eye equivalent as part #e27SR.

view full answer...

Answer 11

Looks like you need a continuous hinge roof vent lid like the part #BV0554-01 based on what I can see in your picture can compared to the install pictures we have of this cover.

view full answer...

Answer 12

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Operator Assembly that Fits Ventline Roof Vent with Old Style Round Lid BV0554-01

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching