Replacement Dome and Operator for Ventline V2119 Series Vent with Older-Style Rounded Dome

Question

Question:

Can you verify for me the part numbers for a replacement dome and operator assembly for a Ventline V2119 vent, with a date sticker of 08/01/05 and a rounded not wedge-shaped lid?

asked by: Ken C

0

Expert Reply:

For your Ventline V2119 Series vent with the older-style rounded dome, you will want to use the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents, White # BV0554-01 or Smoke # BV0554-03.

For the operator, you will want the Replacement Operator with Knob and Screw for Ventline Vent with Metal Dome and Old-Style Rounded Dome # BV0115-04.

I spoke with my contact at Ventline and she confirmed that these are the correct replacement parts for your Ventline V2119 with a sticker date of 08/01/05.

expert reply by: Victoria B

0

Answer 1

I have confirmed with my contacts at Ventline, and the correct replacement operator for the Ventline Dome #BV0554-01, that you are using on your trailer is the #BV0115-04. This replacement operator has a different style of handle than what you…

view full answer...

Answer 2

According to my contact in the engineering department at Ventline, the cause of what you have going on is a damaged operator. The operator is the linkage between the motor and the vent lid. Look at the photo I've provided. If the housing around…

view full answer...

Answer 3

Thanks for submitting a picture of your vent! Because of that I can tell you need a #BV0554-01 which has a continuous hinge.

view full answer...

Answer 4

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to make…

view full answer...

Answer 5

I am not really sure what you are trying to do but you can install a trailer hitch on the rear of a trailer. There are two different kinds of trailer hitches for trailers, frame mount and bumper mount. The frame mount hitches are much stronger but…

view full answer...

Answer 6

It sounds like you have a Heng's Roof Vent 122112. This is known as the Ventline Old Style Rounded Dome Trailer Roof Vent. Replacement parts are, #BV0554-01 for white or, #BV0554-03 for black. This will be the continuous hinge style. Please…

view full answer...

Answer 7

I was able to find a picture of the part number 90110 C1 that you need and found that the exact replacement is the #BV0554-03 that you referenced. If you wanted white instead you'd want #BV0554-01.

view full answer...

Answer 8

Looks like you need a continuous hinge roof vent lid like the part #BV0554-01 based on what I can see in your picture can compared to the install pictures we have of this cover.

view full answer...

Answer 9

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

view full answer...

Replacement Dome and Operator for Ventline V2119 Series Vent with Older-Style Rounded Dome

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching