Fan-Tastic Roof Vent Cover Recommendation

Question

Question:

Can the brackets be adapted for vents that are not metal and cant be drilled? Want to install on a Fantastic Fan, plastic or pvc type material.

asked by: Mike

1

Helpful Expert Reply:

Since you said you have a Fan-Tastic roof vent the correct roof vent cover you would need is the part # DMC38FR which is listed as fitting all Fan-Tastic roof vents.

The Camco # CAM40443 would not be an ideal fit as it would require modification so I would not recommend it. This is a universal style cover that is designed to fit as many applications as possible.

expert reply by: Jameson C

1

Answer 1

For the Fan-Tastic RV roof vents the correct vent cover is the part #FVU1500WH which comes with the needed hardware to install on your camper.

view full answer...

Answer 2

You can still the use the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA86JR on your Fan-Tastic roof vent. This vent cover comes with brackets that will screw into the sides of your vent to give an attachment point for the cover.

view full answer...

Answer 3

Timbren rear-axle jounce spring kit #TGMRTT35D is intended for severe service vehicles such as tow trucks so for your towing/cargo application you will use kit #TGMRCK25D. This no-drill install is suitable for heavy-duty trucks like your 2500…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

The difference between the Firestone Dual Air Command Systems #F49VV and F46VV is the the former is only controlled by a smartphone while the latter can be controlled by a smartphone but it also comes with a Bluetooth remote so you don't have to…

view full answer...

Answer 10

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Fan-Tastic Roof Vent Cover Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching