Dimensions of Mounting Bracket 4-Pole Flat # 18144

Question

Question:

What are the dimensions of product #18144? Im trying to put it inside a 1 3/4inch x 2 3/4inch square tube. Will it fit?

asked by: Chip

0

Expert Reply:

The Mounting Bracket # 18144 measures 2-3/16 inches wide and 1-3/4 inches from bolt hole to bolt hole.

expert reply by: Charles S

0

click to enlarge

Answer 1

The Draw-Tite Class III hitch, part #75237 provides a mounting flange for a trailer connector bracket which is sold separately as part #18144. The bracket would bolt directly to the flange that's already welded to the hitch using the included…

view full answer...

Answer 2

If the knob of the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks #8880508 spins freely that means it is locked. You'd need to insert the change key that came with this into the old lock core from your rack to install it in this…

view full answer...

Answer 3

Thanks for the photo, and there is nothing that comes with the rack specifically would go over the factory moldings of your 2021 Mazda CX-9 when installing the Rhino-Rack RVP Roof Rack for Fixed Mounting Points #RRRVP51. That said, per the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Dimensions of Mounting Bracket 4-Pole Flat # 18144

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching