Replacement Fifth Wheel Head for Demco Hijacker Auto Slide

Question

Question:

I would like to purchase a replacement head for my Demco Autoslider hitch model DM6077 8550024. I only need the head and not the base assembly. Thank you.

asked by: Dennis W

0

Expert Reply:

The replacement head assembly for the Demco Hijacker Auto Slide hitches is the part # DM6081.

expert reply by: Jameson C

0

Ed

7/3/2020

i have a model 2700 pull rite will the dm 6081 work on my hitch.

Reply

Chris R.

7/8/2020

The PullRite and Demco 5th wheel hitches are completely different models and brands, so you wouldn't be able to use the Demco Replacement Head # DM6081 on your PullRite hitch.

Reply

Answer 1

If the pins you are asking about in the Replacement Head for Demco Hijacker Autoslide 5th Wheel Trailer Hitches #DM6081 are 1 inch diameter and 9.38 inches long. I reached out to my tech contact at Demco to ensure you had the correct dimensions. If…

view full answer...

Answer 2

Replacement Trim Rings for the Ford trucks with factory rail kit can be ordered as part #RP58458. Part #58199 that you referenced is a set of 2 rubber puck plug covers. We also offer a Puck Service Kit #58253 that includes one each: puck, trim ring,…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Fifth Wheel Head for Demco Hijacker Auto Slide

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching