Installation of Bolts on the Curt Front Mount Hitch # 31302 for a 2002 Chevy Suburban 1500
Question:
I see how to use the wire to get the bolt in place...but how do you tighten the bolt since you cant get a wrench on the top part of the bolt. Thank you
asked by: Alan
Helpful Expert Reply:
The bolt and washer that are inserted into the frame will act as the wrench on the top part of the bolt. The bolt itself is a carriage bolt which has a square notch in the bottom of the head and the washer has a slightly larger square notch in it for the bolt to sit and this will prevent the bolt from free spinning when attaching the nut. You will want to hand tighten the nut before using a wrench to secure it down. If you watch the attached video at 2:21 minute mark you can see the installer check to see that the bolt and washer have lined up properly.
The manufactures bolt that gets re-inserted will already be in a pre-threaded location, so you will not need a wrench to secure the nut side down here either.
I checked and confirmed that the Curt # 31302 is a fit for your 2002 Chevrolet Suburban 1500.
I have linked the above mentioned product as well as the video installation referenced to this page for your convenience.
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Front Mount Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Trailer Hitch
- Search Results: front receiver hitch
- Shop: Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs
- Shop: Surco Safari Rack 5.0 Rooftop Cargo Basket for Thule Roof Racks - 84" Long x 50" Wide
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles - 2" x 2" Hitch
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: Recommended Brake Controller and Wiring Harness for a 2002 Chevrolet Tahoe
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Shop: Brake Controller
- Search Results: trailer hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: etrailer Hitch Pin Alignment Collar Review
- Search Results: weight distribution hitch
- Shop: Suspension Enhancement
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Can You Back Up With Reese Pro Round Bar Weight Distribution RE34FR
- Article: How to Measure for Trailer Hitch Drop
- Shop: Roof Rack
- Article: Trailer Wiring Diagrams
- Search Results: roof rack