Where is Overall Length of 3 Feet for the Camco RhinoFLEX RV Sewer Hose Kit # CAM39768 Measured

Question

Question:

CAM39768 how far will the total unit stretch end to end before the 90deg elbow ? or with the elbow ?

asked by: Ron R

0

Expert Reply:

When fully extended the Camco RhinoFLEX RV Sewer Hose Kit # CAM39768 measures 3 feet from end to end. The length we give for this is measured from end to end.

When fully retracted it measures 15-1/2 inches from end to end.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Jim! The Taskmaster and Westlake tires, like the Taskmaster ST235/75R15 Off-Road #TA45RR and Westlake ST235/75R15 Off-Road #WST54FR you were looking at, are made in China. A lot of people tend to shy away from trailer tires made in China but…

view full answer...

Answer 3

Hey Medic, so the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR was designed for off-road traction but it is going to do really well in the wet and snowy conditions. Based on what you are looking for these are going to work well.

view full answer...

Answer 4

The SAE codes on the lens of a light indicate what function(s) that light can perform. Many trailer lights are designed to do more than one function. Based on the SAE codes on the first light, it performs the following functions: A - Rear reflector…

view full answer...

Answer 5

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 6

I have a couple screens that are close to the dimensions you mentioned. They are the Valterra Bug Screen #A10-1322VP (suburban Models) which is going to be 4.5" x 4.5" and the Valterra Bug Screen #A10-1320VP (Atwood & Suburban) which is…

view full answer...

Answer 7

On your 2000 Ford F-250 SD, the camper tie downs used for the factory hitch will usually be different than the tie downs used for an aftermarket hitch like the Draw-Tite Class V 2-1/2 Inch Hitch, part #DT45508. The front camper tie downs will be the…

view full answer...

Answer 8

The Screen Defender Screen Protector part #LC92FR and Screen Shot Automatic Screen Door Closer part #LC730815 both mount in the same location so they most likely won't work well together. Therefore, you will need to choose between one or the…

view full answer...

Answer 9

I went out to the warehouse and measured the Replacement OEM BOLT Lock for Extang EnCore Hard Tonneau Cover 28620192-28 and measured 2" across on the top, but the bottom part that would actually go into the tonneau cover measured 1-3/8" in…

view full answer...

Answer 10

To fit the hose in the bumper you will have to take the orange collars off the ends of the RhinoFLEX hose. There should be side storage on your trailer that you can store these and other items in allow the hose by itself to fit as intended. This is…

view full answer...