Options for Towing a Fifth Wheel Trailer with a 2013 Chevy Silverado 5-1/2 foot Bed
Question:
For a 5th wheel Motor home I need to install a hitch in my 2013 Silverado short bed box 5foot 8 the recommendation is an automatic slider hitch since the bed is a short bed. Is there a manual option or other option.
asked by: Tim
Expert Reply:
For a truck bed as short as yours there's only one slider hitch we offer that would give enough clearance. That would be the part # DM8550040 which is an automatic slider that can do 22-1/2 inches of clearance when slid back.
The only other option is a Sidewinder pin box with a stationary hitch. For a stationary hitch you would then want the part # RP30047 and then rail kit part # RP50064-58 which is a custom install kit that would install in half the time as a universal kit and minimize drilling. This kit also will work with the Demco.
Sidewinders are pin box specific so you will first need to know what pin box you have now in order to pick out the correct one.
There should be a sticker or a stamping on the OEM pin box of the trailer that will list the pin box number that is on the trailer.
Once you figure out which pin box you have you can check the FAQ I attached that has a chart that shows the correct Sidewinder to get based on which pin box you have.
Products Referenced in This Question
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 13,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 3250 lbs Vertical Load
- 13000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 15-1/4 - 18 Inch Tall
- 22-1/2 Inch Fore/Aft Travel
- Demco
more information >
Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 13-1/2 - 17 Inch Tall
- Reese
more information >
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Product Page this Question was Asked From
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 4500 lbs Vertical Load
- 18000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 16-1/2 - 19-1/4 Inch Tall
- 14 Inch Fore/Aft Travel
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Are Capture Plates Needed When Using the Demco Autoslide With a Lippert Road Armor Pin Box
- Q&A: Are Any Adapters Or Rails Needed For The Demco Autoslide For Ram Puck System # DM69GV
- Q&A: Will the B&W Companion Fit Into OEM Pucks on a 2024 Chevrolet Silverado 2500
- Article: Ram Trailer Tow Prep Package
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Q&A: Do I Need a Capture Plate for a Rota Flex Pin Box?
- Q&A: How to Convert a Demco AutoSlide 5th Wheel Hitch to Fit in the Ford Factory Puck System
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: The Best 5th Wheel Hitches