D-Ring Adapters for a Falcon 5250 Tow Bar and Jeep with D-Rings on the Bumper

Question

Question:

I am looking for the correct p/n for Jeep D-Ring bumper mount adapters for my Roadmaster Falcon 5250 tow bar. The Jeep mounts are 3/4inch thick with 1inch holes. Thanks.

asked by: Jeff D

0

Expert Reply:

For your Falcon 5250 tow bar you will need adapters # RM-035. They fit 3/4 inch thick D-rings with either 7/8 inch or 1 inch diameter holes. Be sure to check that the bumper is rated for flat towing.

expert reply by: Michael H

0

Answer 1

There is one key difference between the Blue Ox Patriot 2 Portable Braking System part BRK2016 and the Blue Ox Patriot 3 Portable Braking System part #BLU37TR. The difference is an extra safety measure built into the Patriot. The Patriot #BLU37TR…

view full answer...

Answer 2

I reached out to my contact at Demco and he confirmed that the Demco Excali-bar will work with the Roadmaster #RM-035 Adapters for your Jeep. However, the Roadmaster D-ring Adapters are not confimed to fit a Rugged Ridge XHD bumper, so if that is…

view full answer...

Answer 3

For your 2004 Jeep and your Falcon 2 tow bar, you will want the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick #RM-035-1. These adapters will connect your 1 inch D-Rings (pad eye) to your tow bar.…

view full answer...

Answer 4

For your 2012 Jeep Wrangler Unlimited we have two options for base plate kits to attach to the D-rings of your bumper. We have the part #RM-035 which is the correct fit if you have 3/4 inch D-rings or the part #RM-035-1 which fits if you have 1 inch…

view full answer...

Answer 5

Roadmaster offers their Adapter for Jeep D-Ring Bumper Mounts #RM-035-1 to allow use of one of their compatible tow bars with bumper-mounted D-rings. The included pins will fit either 7/8-inch or 1-inch holes. They also have kit #RM-035 for 3/4-inch…

view full answer...

Answer 6

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

view full answer...

Answer 7

I do have an option for you but the Adapters for Jeep D-Ring Bumper Mounts part #RM-035 are only compatible with RoadMaster tow bars therefore will not work with a ReadyBrake ReadyBrute Elite or Hercules tow bar. It also doesn't look like…

view full answer...

Answer 8

Flat towing your Jeep Wrangler behind your Class A motor home will require the tow bar, a lighting/wiring kit, safety chains, base plates and a supplemental braking system. The linked article will give you background on each of these. The Quick…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

D-Ring Adapters for a Falcon 5250 Tow Bar and Jeep with D-Rings on the Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching