4-Way Mounting Bracket Recommendation

Question

Question:

What is the part number?

asked by: Jerry M

0

Expert Reply:

An option is to attach the bracket to the bottom of the bumper on your vehicle. For that you would want the part # 18144.

expert reply by: Jameson C

0

Answer 1

The main difference between Titan tire chains #TC2524 and #TC2323 is that the chain set #TC2323 is rated as an S Class chain, meaning that it requires less clearance to fit and operate safely inside the wheel wells on a passenger vehicle. Chains…

view full answer...

Answer 2

We do not recommend you drill into the hitch to install the Mounting Bracket 4-Pole Flat #18144. Typically you will install this bracket onto the bumper or rear fascia. Like you said, drilling into the hitch could potentially affect the structural…

view full answer...

Answer 3

The EcoHitch #EH35VR Class III hitch and the trailer wiring harness are sold separately, because not everyone uses a hitch for towing, some folks use them as an attachment point for hitch mounted accessories like bike racks or cargo carriers. The…

view full answer...

Answer 4

I recommend taking a look at your wiring harness to determine what brand of harness is installed on your vehicle. If the wiring harness on your vehicle is manufactured by Draw-Tite, Hidden Hitch, Reese, Tow Ready or Valley, the Tow Ready Mounting…

view full answer...

Answer 5

I'm guessing you have a 4-Way connector on your 2018 Honda CR-V, and I do have a couple of options for you to secure a 4-Way flat connector to the Curt Trailer Hitch #C13397! The first is a combination of the brackets #C57202 and #18144. These…

view full answer...

Answer 6

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 7

I am not sure which 4-Pole bracket you have but most are similar in design and installation. The bracket should be installed in a sturdy location on the lower portion of the back bumper near or on the hitch. If on the hitch, do not attach by drilling…

view full answer...

Answer 8

Class S is the Society of Automotive Engineers' definition of the least amount of space that should be provided around the drive tires of any vehicle to accommodate the use of a winter traction device. A Class S tire chain meets this standard and…

view full answer...

Answer 9

Yes, the Tekonsha item #TK57VR wiring harness works with your 2020 Toyota Highlander XLE Hybrid. I would be glad to recommend a full towing set up for your Highlander. Starting with the trailer hitch receiver I recommend the EcoHitch item #EH35VR due…

view full answer...

Answer 10

I spoke with my contact at Air Lift about Helper Springs, #AL60821, and your 2010 Ford Flex. He stated that he had no notes that stated that kit could not be used on models with the Ecoboost option and that it should fit your Flex. I have included a…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

4-Way Mounting Bracket Recommendation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching