Replacement Mounting Brackets and Hardware for Westin Bull Bar on a 2005 Dodge Ram 1500

Question

Question:

I am looking for mounting brackets for the Bull Nose on a 2005 Dodge Ram 1500

asked by: Ron P

0

Expert Reply:

The Westin Bull Bar for your 2005 Dodge Ram is # 32-1205. It is not longer available for purchase. We do have replacement brackets and hardware to mount this Bull Bar use # 32-120PK.

Use of a Bull Bar could block the front license plate. There are license plate relocation kits available for these Bull Bars; # 32-0055.

expert reply by: Michael H

0

Answer 1

Bull Bar installation kits such as #32-169PK are both vehicle-specific and product-specific, meaning that a given kit will work ONLY on the bull bar it is intended for and ONLY on the particular vehicle for which that bull bar was intended.…

view full answer...

Answer 2

I confirmed with my contact at Aries that the spacing of the pre-drilled holes on the Aries Bull Bar #AA35-3007 (not the mounting holes) are 14-1/2 inches apart. I went ahead and included a diagram of the dimension for better perspective. If you find…

view full answer...

Answer 3

The Replacement Bracket Kit for Westin Bull Bar - New Style - 32-1200 #32-120PK is a fit for your 2005 Ram 2500 Truck if you have the Westin Ultimate Bull Bar.

view full answer...

Answer 4

If the bull bar you have is the Westin Ultimate Bull Bar #32-1205 or #32-1200, you will want part #32-120PK. This kit includes the installation brackets and hardware. Westin makes their bull bars specific to each vehicle. If you have a bull bar with…

view full answer...

Answer 5

I have a solution for you, but the Replacement Hardware Kit #AABRKT-2059 is not a confirmed fit for the Aries #AA5058 model grille guards (and the different variations of it). Instead, you'll want to use the Replacement Bracket Kit #AABRKT-5058,…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 9

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 10

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Replacement Mounting Brackets and Hardware for Westin Bull Bar on a 2005 Dodge Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching