Replacement Installation Kit for Westin Bull Bar for 2003 Dodge Ram 1500

Question

Question:

Will this part fit my 03 dodge ram 1500 and if.not were could I fine one that will

asked by: Gilbert

0

Expert Reply:

If the bull bar you have is the Westin Ultimate Bull Bar # 32-1205 or # 32-1200, you will want part # 32-120PK. This kit includes the installation brackets and hardware.

Westin makes their bull bars specific to each vehicle. If you have a bull bar with a different part number, it is likely that the brackets will not fit the bull bar.

expert reply by: Victoria B

0

Answer 1

So the thing about all of the Westin bull bars and grille guards is that the guard/bar and the hardware are both made to fit specific vehicle applications. So what that means for you Eric is that there isn't a way to adapt the bull bar you have…

view full answer...

Answer 2

I confirmed with my contact at Aries that the spacing of the pre-drilled holes on the Aries Bull Bar #AA35-3007 (not the mounting holes) are 14-1/2 inches apart. I went ahead and included a diagram of the dimension for better perspective. If you find…

view full answer...

Answer 3

I have a solution for you, but the Replacement Hardware Kit #AABRKT-2059 is not a confirmed fit for the Aries #AA5058 model grille guards (and the different variations of it). Instead, you'll want to use the Replacement Bracket Kit #AABRKT-5058,…

view full answer...

Answer 4

The Replacement Bracket Kit for Westin Bull Bar - New Style - 32-1200 #32-120PK is a fit for your 2005 Ram 2500 Truck if you have the Westin Ultimate Bull Bar.

view full answer...

Answer 5

Bull Bar installation kits such as #32-169PK are both vehicle-specific and product-specific, meaning that a given kit will work ONLY on the bull bar it is intended for and ONLY on the particular vehicle for which that bull bar was intended.…

view full answer...

Answer 6

The Westin Bull Bar for your 2005 Dodge Ram is #32-1205. It is not longer available for purchase. We do have replacement brackets and hardware to mount this Bull Bar use #32-120PK. Use of a Bull Bar could block the front license plate. There are…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Replacement Installation Kit for Westin Bull Bar for 2003 Dodge Ram 1500

Product Page this Question was Asked From

Continue Researching