Replacement Hub Recommendation for Hub that is Stamped with BTR
Question:
I have an old boat trailer that I just picked up and want/need to replace 1 hub going to do both. Havent tore into it yet, but looked on the back of the hub and it has BT 100 stamped in it with an R opposite side from the BT. I found where someone said it was a Colman hub ?? and it had L44649 bearings in it. So looking to find replacement hubs. I have no clue as to year, make, or model of the trailer. Can you point me to a comparable hub, just from the BT 100? Thanks for any help,
asked by: Jacob
Expert Reply:
BTR is a standard spindle that a lot of trailer axles have on them. It seems that your trailer has a BTR spindle which makes picking out a hub pretty easy.
For an idler hub you would want the part # 8-258-5UC1-EZ. Or if you want a brake drum you would want the part # 8-257-5UC3-EZ.
Both of these hubs will fit the trailer axle and have the 5 on 4-1/2 inch bolt pattern you are looking for.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Shop: Brake Controller
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1-EZ Review
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: ONE LED Trailer Tail Light - 5 Function - Submersible - 3 Diodes - Red Lens - Passenger Side
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Bearing Buddy Trailer Bearings Races Seals Caps BB17B Review
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Troubleshooting a Dragging Electric Brake on a Trailer
- Q&A: Replacement Seal for National 471750
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: How to Determine the Correct Size Grease Seal for a Forest River Shamrock Trailer
- Q&A: What Is Hub Length Of Trailer Idler Hub Assembly For 2,000-lb Axles
- Q&A: Replacement Hub Jet Ski Trailer w Spindle that Has 1.06" Diameter for Bearings and 1.5" for Seal
- Q&A: Is It Normal for Trailer Wheels to Bow Out At the Bottom
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Performance Tool Plastic Bearing Packer Review
- Video: Dexter Trailer Hub and Drum Assembly Installation 8-257-5UC3-EZ
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Video: Kodiak Brake Pads Review and Installation
- Video: Electric Over Hydraulic Disc Brake Installation HBA16
- Article: Troubleshooting Brake Controller Installations
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: bt~100
on Trailer Bearings Races Seals Caps
