Replacement Weight Distribution Head and Shank for Reese 750 Pound Trunnion Spring Bars

Question

Question:

Will this head and shank work with trunnion bars marked Reese 750- TW750# - GW10,000#? Thanks,

asked by: G L

0

Expert Reply:

I spoke with my contact at Reese regarding the Replacement Head and Shank for Reese Weight Distribution Systems - Trunnion Bar, # RP54980. He stated that it will work with your existing spring bars. I have included a link to the installation details for this part below.

expert reply by: Michael H

0

Answer 1

Sorry to hear about your truck being stolen. It sounds like your Reese trunnion weight distribution system's shank and head assembly were both probably stolen. Your 1970s trunnion bars WILL work with replacement head part #RP54980; I confirmed…

view full answer...

Answer 2

I reached out to my tech contact at Reese and the 21210 bars are a fit for the Replacement Head and Shank for Reese Weight Distribution Systems #RP54980 and are rated for up to 1000 lbs based on what we can find. They said if you look under the bars…

view full answer...

Answer 3

I spoke with my contact at Reese, and according them, older trunnion spring bars should fit current heads like part #RP54980.

view full answer...

Answer 4

My contact at Reese indicated that older weight distribution spring bars/trunnions will fit new replacement heads, such as Reese part #RP58167 (but new bars/trunnions will not fit older head assemblies). He noted that there may be a slightly…

view full answer...

Answer 5

Yes the Reese High Performance Trunnion Head with Shank, #RP54980, comes with the, #RP58167, trunnion head. You are going to need to measure the bar thickness you have. The earlier bars were 1-1/8 inches and the later bars are 1-3/8 inches. You…

view full answer...

Answer 6

Thank you for the pictures. From them I can tell that you have a Reese trunnion style weight distribution system. Which makes the Replacement Head for Reese Weight Distribution System #RP58167 the correct replacement head for your system.

view full answer...

Answer 7

As long as your spring bar arms are Reese trunnion-style bars, the Replacement Head and Shank #RP54980 that you referenced will work great for you. The shank that is included with this head and shank kit is rated for towing capacities up to 15,000…

view full answer...

Answer 8

I've actually spoken with Reese in the past about the part number you have 22210 and they told me that based on that you have an SC system and the replacement head you can use is the part #RP54980.

view full answer...

Answer 9

I went out to our warehouse and measured the Draw-Tite and Reese Replacement Weight Distribution Trunnion Style Head, part #RP58167. The distance from the top, flat portion of the head to the vertical mounting holes is 3/4-inch. From bolt hole to…

view full answer...

Answer 10

If the spring bars have 22210 stamped onto them then you can use the Replacement Head for Reese Weight Distribution System part #RP58167 which will allow you to reuse your existing hitch ball, shank, and spring bars.

view full answer...

Answer 11

I checked with my technical contact at Reese and he said that as long as your trunnion bars are the Reese branded bars, like part #66010, they can be used with the Replacement Head and Shank for Reese Weight Distribution Systems, #RP54980. He also…

view full answer...

Answer 12

We've checked with Reese in the past and they have told us that the #RP58112 was once the 61241 so this would work great as a replacement head.

view full answer...

Replacement Weight Distribution Head and Shank for Reese 750 Pound Trunnion Spring Bars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching