Replacement Head for Reese Weight Distribution System with 22210 Spring Bars

Question:

Hello, I have an older Reese weight distribution hitch with a broken latch pin, I would like to purchase an replacement head for my set-up. My existing hitch only has the numbers 555 and possibly followed by two 00. It looks like the number is 55500. I tow a tow behind travel trailer that has a 6900 GVWR and unloaded TW of 638. I have two sets of trunnion bars, one set has a number of 22210-G and say 750lbs. These are straight. The other set has the number 22210-H and say 800lb. These have a bend on the ends unlike the straight ones above. My ball hitch is 1 1/4 shank. Could you tell me if I can buy a replacement head is it #RP58167 and if I can buy a replacement head, will the 22210-H trunnion bars rated fro 800lb TW fit the replacement head, I would like to use my existing shank and 1 1/4 ball with this replacement head. I have pictures if they will help. Any help would be appreciated. Thank you very much!

asked by: Peter

Expert Reply:

If the spring bars have 22210 stamped onto them then you can use the Replacement Head for Reese Weight Distribution System part # RP58167 which will allow you to reuse your existing hitch ball, shank, and spring bars.

expert reply by: Conner L