Will Fulton 1500 lb Bolt-Thru Swivel Jack Fit the Same Mount on Older Fulton Swivel jack
Question:
I had a fulton trailer jack recently break on me and i was looking to get one thats similiar i dont have the part number on the old one and this one looks the closest. I have the freame thats still welded on the boat that has a bolt that goes in the middle of the jack on the frame. Will this one fit on the old bracket? Thanks
asked by: Kurtis R
Expert Reply:
Fulton bolt-through trailer jack # F1411300301 is the only Fulton jack that mounts using that 1 center bolt. Since your old jack was a Fulton it must either be this same jack or an earlier model but they use the same mount.
The mount in question and what is on your trailer is # P9012-00. On the off chance that the mount you have is slightly different then you could always use this one as a replacement. The 4 holes are 3 inches apart on center. The bolt that it uses is a 1/2 inch bolt, 1-1/16 inches long. The nut is a matching 1/2 inch coarse thread nut. If that matches what you have then this Fulton jack will fit. If not you could also purchase mount # P9012-00.
Products Referenced in This Question
Jack Mounting Bracket for Fulton Marine Jack - Weld-On
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Fulton
more information >
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Continue Researching
- Shop: etrailer Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 10-3/8" Lift - Zinc - 1.5K
- Shop: Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Black - 1.5K
- Shop: Replacement Hardware Kit for Fulton Swivel Jacks
- Shop: Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
- Video: Fulton Trailer Jack - Side Frame Mount Jack - FXPD15L Review
- Shop: Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Shop: Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K
- Article: Best Boat Trailer Jacks
- Q&A: Fulton Marine 1.5K Sidewind Trailer Jack XPD15L0126
- Q&A: Specs for Mounting Bolts for Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack with 10 Lift - F87CR
- Q&A: How to Remove Fulton Magnum Series Bolt-Thru Trailer Jack
- Video: Fulton Bolt-Thru Swivel Marine Jack with Caster Review
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Video: Fulton Trailer Jack - Side Frame Mount Jack - F1411300301 Review
- Q&A: Hardware to Attach Fulton Bolt-Thru Swivel Marine Jack
- Search Results: ftj120w0301
- Video: Review of Fulton - Trailer Jack,Camper Jack - F0933325S00
- Video: Fulton Round Snap Ring Swivel Marine Jack Review
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FTJ120W0301
- Q&A: Which Capacity Jack for a 2002 Viking Pop-Up Camper
- Q&A: Bolt Hole Pattern of Replacement Bolt-On Mounting Kit
- Q&A: Mounting Plate Recommendation for Fulton XP Trailer Jack
- Search Results: f1413020134
- Search Results: p9012~00
- Search Results: jack adapter
- Search Results: fulton jacks
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer jack