Torklift Suspension Enhancement Recommendation for a 2015 GMC Sierra 3500

Question

Question:

I have a 2015 GMC Denali 3500 Dually 4x4. I am interested in adding Torklift Stableload. Application calls for A7202 for upper only. The frame bracket and pad plate is curved and not flat. Because it is curved the Stableload will not have 100 contact when bolted on. Is this correct or does it not work for this vehicle?

asked by: Bob L

0

Expert Reply:

For your 2015 GMC Sierra 3500 4WD there are actually two Torklift Stableloads listed as a fit. There is the part # TLA7202 which is the upgrade for the upper overload and there is the part # TLA7310 which is the upgrade for the lower.

The # TLA7310 would be what I would go with if it were my truck as you can easily connect and disconnect the system depending on if you need it or not.

In the instructions for the # TLA7202 there is a section on trimming the rubber pad so that it makes better contact with the truck. You don't have to do this to make it work but it is an option.

expert reply by: Jameson C

0

Answer 1

The Torklift StableLoad Suspension Upgrade #TLA7202 is a great option for improving the handling and reducing side-to-side sway on your 2017 GMC Sierra 3500 Denali when your truck camper is attached. These will simply bolt onto each frame-mounted…

view full answer...

Answer 2

You are going to want to trim the block down about an inch. We have seen this issue before on similar GMC trucks and if you don't trim the block down the suspension is going to feel incredibly rough. If you trim about an inch off and match the…

view full answer...

Answer 3

The TorkLift StableLoad Suspension Upgrade #TLA7202 is a great option for your 2019 GMC Sierra 3500 as it is designed for trucks that have factory leaf springs and an upper overload spring. The StableLoad Suspension Upgrade is going to help reduce…

view full answer...

Answer 4

The TorkLift StableLoad Suspension Upgrade Kit #TLA7202 installs WITHOUT drilling or trimming on vehicles with factory leaf springs and an upper overload spring. The four springs install in place of your factory bump stops. Written installation…

view full answer...

Answer 5

The TorkLift StableLoad Suspension Upgrade for Upper Overload Springs, #TLA7202 are the fit for your 2016 GMC Sierra 3500. They will assist in reducing side to side sway as well as porpoising, and they will reduce body roll. They will reduce the…

view full answer...

Answer 6

The blocks on the TorkLift StableLoad #TLA7202 are 2-1/2" tall.

view full answer...

Answer 7

Thank you for the pictures of your overload springs. Since you actually have upper overload springs and not lower overload springs you will instead need the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7202. These will mount…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Torklift Suspension Enhancement Recommendation for a 2015 GMC Sierra 3500

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching