Recommended Class I Hitch and Bike Rack for 2015 Lexus CT 200h Hybrid Liftback

Question

Question:

I have a Lexus CT200H. I want to obtain a hitch and bike rack for my Lexus. I have checked out what you have to offer but when I viewed an underbody of a picture you have of a Lexus CT200 and my CT200H it looks different and need to know what hitch will work with my CT200H. Is there a hitch that will work on my Lexus CT200h 2015 car. If you have a unit that will work can you send me the necessary info of what you have and a picture of the underbody to see how it would attach to my car.

asked by: Philip J

0

Expert Reply:

I checked with Curt about the proper hitch fit for your 2015 Lexus CT 200h Hybrid Liftback and their 1-1/4-inch Class I hitch # C11200 is a confirmed fit. Your hybrid is definitely going to have visible differences from the non-hybrid CT200, so this is not cause for concern. Do note that when this hitch is installed on your car the tow hooks will be permanently removed.

Curt rates this hitch as an easy installation. All the necessary hardware is included and I have linked the written instructions for you, which include photos. Required tools are listed in the instructions. I also linked a helpful article with tips for easier hitch installation.

You will need to use Curt's stabilizing strap # 18050 to help support your bike rack in order to retain your Curt warranty coverage.

A Class I hitch can carry up to 2 bikes. You can see all available Class I hitch racks using the link provided. If you like a full-featured platform style rack I suggest Thule's Doubletrack Pro XT # TH92BJ. This carrier includes locks for the rack itself and for your two loaded bikes and it can handles tires as wide as 5-inches.

For a great economical option, I recommend the Swagman XC # S64650. This platform carrier offers 4-inches of height rise in the shank for better ground clearance and it secures the bikes at 3 points (each wheel and at the frame). It can handle tires as wide as 3-1/2-inches, wheelbases up to 51-1/2-inches and you can add anti-rattle lock # S64031 to secure both the rack and your bikes.

The linked articles will help you consider which rack type will work best with your particular bikes.

expert reply by: Adam R

0

Answer 1

One of the most important things to consider when choosing a bike rack is the bumper clearance. Because there is not a set standard of how far back the receiver is recessed under the vehicle, the distance between the hitch pin hole in the receiver…

view full answer...

Answer 2

We do not have any pictures showing Curt trailer hitch #C11186 installed on an Audi A4. We take pictures when customers leave vehicles here for installations. We have not had that particular vehicle in yet for a hitch installation. But I can tell you…

view full answer...

Answer 3

Yes, fascia trimming is required to install Draw-Tite trailer hitch #DT24950 on a 2016 Audi A4. The area that needs to be trimmed is up underneath the vehicle and not visible otherwise. I have included a diagram that shows the area that needs to be…

view full answer...

Answer 4

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a video to…

view full answer...

Answer 5

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 6

I believe that the Curt T-Connector that is installed on your 2015 Toyota Highlander is part #C56217. Since it comes with a 10amp fuse you will want to make sure that you continue to use a 10amp fuse because the fuse relates directly to this wiring…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Michelle, the Hollywood Racks Destination bike rack part #HLY94FR that you referenced is a really great bike rack that is compatible with Class I hitches like the Curt part #C11200 that you have installed on your 2011 Lexus CT 200H. It's very…

view full answer...

Recommended Class I Hitch and Bike Rack for 2015 Lexus CT 200h Hybrid Liftback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching