Size of the Cross Tube on the Curt Hitch # C15319

Question

Question:

Does this hitch have 2-1/2inch Square Cross Tubes or 3?

asked by: Kevin

0

Expert Reply:

I spoke with my contact at Curt and he informed me that the main cross tube of the Curt hitch part # C15319 that you referenced measures 3 inch by 3 inch.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I did a little research on your 2001 Dodge Ram 3500 and found that it's max towing capacity is listed as 13,900 lbs. I would strongly recommend you check the owners manual of your truck to see what Dodge lists as the capacity for your truck…

view full answer...

Answer 2

It sounds like you have the 1996 Dodge Ram Pickup with an 8' bed and a standard or step bumper. With this being the case my recommendation is the Curt Trailer Hitch Receiver #C15318 because of the design and how it installs. The Curt hitch I…

view full answer...

Answer 3

The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket for Dodge/Chrysler #PK11893-11933 will fit 1999 Dodge Ram 2500's that came with a 7-way connection from the factory. The 7-way socket will require drilling of new holes as it does…

view full answer...

Answer 4

Replacement connector #42145 only has 7 pins because there are only 7 functions in a 7-Way. It is possible the factory connector has some other circuit in it but it would not be used by the 7-Way. Or like you said it could be a dummy pin. Connector…

view full answer...

Answer 5

Drilling is not required on all vehicles to install Curt trailer hitch #C15319. However, due to manufacturing variances, some vehicles may require drilling. I have included a link to the installation instructions for you. You should be able to see…

view full answer...

Answer 6

In some cases trailer hitches can get slightly bent in shipping. Most likely that is not the case for the Curt Hitch part #C15319 since it is such a heavy duty hitch, but it is a possibility. If you can get all the bolts started I would recommend…

view full answer...

Answer 7

Good question. No the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" part #DT45513 will not fit on your 1998 Dodge Ram 2500. You will instead want to use Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"…

view full answer...

Answer 8

To use one of the SuperTruss extensions like the part #TLE1548 on your 2002 Dodge Ram 3500 you will need a Torklift Superhitch part# TLD1100. Since your camper is going to extend out an additional 4 feet the #TLE1548 would be an ideal solution for…

view full answer...

Answer 9

Zinc plated screws are going to be the best option for use with aluminum to resist galvanic corrosion. This corrosion you are referring to is from two dissimilar metals reacting so you want to use the most similar metals when installing your E-track…

view full answer...

Answer 10

We have spoke with Ranch Hand before about the fit of trailer hitches with their bumpers and they state that since their bumpers are designed to fit with the factory hitches for the vehicles the aftermarket ones would fit as well. The Curt hitch part…

view full answer...

Answer 11

A roll pan bumper is a style of bumper that that will make the back of your tailgate seamlessly flow down your vehicle and give the appearance of flatness. With a roll pan bumper there is no step like a traditional bumper you see on many trucks going…

view full answer...

Answer 12

We do have a no drill bracket that will work great with the Curt item #C15319 hitch. It is the Curt Easy Mount Bracket item #C58000. The Curt easy mount bracket fits over the hitch receiver opening and secures around the lip with the included…

view full answer...

Size of the Cross Tube on the Curt Hitch # C15319

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching