Wheel Net for 31 x 10.5 Inch Jeep Tires

Question

Question:

Will these accommodate Jeep tires that are 31inch by 10.5? They are on 15 inch rims.

asked by: Deela

0

Expert Reply:

My Ultra-Fab representative tells me that the # UF46-700034 wheel net works best on tire diameters up to around 28 inches.

I'd recommend using an ratcheting axle strap like # BDW20229 from Bulldog Winch. Each strap has a 3335 lb capacity.

If you click the provided link, you can see a product demonstration video featuring the Bulldog Strap I recommended.

expert reply by: Mike L

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 4

We have the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs #BDW20362 which is very similar to a wheel net and is compatible with diameters up to 37 inches. It is 9 inches wide so it won't fit over…

view full answer...

Answer 5

The only axles we have hubs for that do not have spindles are the Replacement Hub Assembly for Demco Kar Kaddy Tow Dolly - Qty 1 #DM04369 These have the rectangular mount you mentioned but we do not have any brake options for these hubs. If you want…

view full answer...

Answer 6

We off the Demco tow dolly Replacement Hub part #DM04369. This has the 5-on-4-1/2 stud pattern (the same as 5-on-115mm).

view full answer...

Answer 7

The Replacement Hub Assembly for Demco Kar Kaddy #DM04369 is the only hub assembly we have for the Kar Kaddy's. There is no 5 on 4 bolt pattern, you likely already have a 5 on 4-1/2 bolt pattern. I recommend double checking the measurements. I…

view full answer...

Answer 8

The Mopar flat-tow wiring kit 68321424AB which was installed on your 2015 Jeep Cherokee requires a 10-amp fuse. You will be able to source this from your local hardware store. The Demco SBS Reinstall Kit #SM99226 will contain all the parts needed to…

view full answer...

Answer 9

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

view full answer...

Answer 10

I believe the metal part you are referencing is the metal part that is already attached to the Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Left Side part #DM5982 I have attached a picture for you to look at from the web page…

view full answer...